Structure:
a rigid and anti-slip walking surface.
Erection platform:
facilitates smooth operation when fastening the masts during
erection and fastening mast ties to the wall, and can be
positioned on both sides of the platform.
Drive unit:
runs on a mast section via a series of guide rollers,
mounted on a tandem frame to distribute the pressure
consistently for smooth travel. The two-speed or
single-phase gear-motor overload system and safety device
system are installed in the center.
Mast sections:
are fixed to each other with four eyebolts, making assembly
quick and safe. The rack is screwed to the mast.
Base frame:
The machine is easily positioned, even in narrow places, as
the base frame is smaller than the platform. The first mast
section and the cable basket are screwed on (until 100m).
Load ramp:
The exit side consists of a ramp system which includes a
control bar system with vertical or horizontal bar opening.
The entrance side consists of a bi-foldable gate system
which allows easy loading of the platform with a forklift.
The exit ramps and entrance doors are available in several
sizes.
Landing gates:
For the TPL 1800 / 2000 / 2000D models, the landing gates
have a mechanical or electric interlock and are easy to
assemble on both the scaffolding and the building landing.
SC 45/30 FC - DOL
-
Microprocessor lift control system reduces waiting times
-
Can be equipped with a frequency control for smooth
starting and stopping
- Single or dual car configurations
- Can share the mast of an MC-450 mast climber
- Flexible modular design offers lengths 2-3.2m
- Low energy consumption
